Description
PCI Express X1 Network adapter adopts Intel a high performance Gigabit network controller JL82571GB , By providing unparalleled features of virtualization, flexible features, and proven reliable performance, it solves the high requirements of the generation data center, it has Quad 1Gps RJ45 port which can setup a long-distance link with a file server or a remote workstation.
Network Card Specifications: 
| PCI-Express host interface specification | v2.0 with 2.5GT/s BUS width |
| Power Management | Complies with PCI Bus Power Management Interface Specification Rev1.1 |
| Chipset | Intel JL82571GB |
| PCI-Express lanes | x1 |
| Port Type | Quad port 1GbE RJ45 |
| Standards Compliance | IEEE802.3ab, IEEE802.3u, IEEE802.3 |
| Duplex Operation | Half duplex at 10/100Mbps, full duplex at all supported speeds |
| Layer 2 Functions | IEEE 802.3x Flow Control, IEEE 802.1q VLAN |
| Receive-side Scaling (RSS) | Supported |
| IP Protocol Support | IPv4, IPv6 |
| Jumbo Frame Support | Up to 9.5K |
| Checksum Offloading | UDP, TCP, IP |
| Management | Statistics and RMON |
| Virtualization | VM device queues, Next Gen VMDq (8 VMs) |
| Interrupt Control | Interrupt throttling control to limit maximum interrupt rate and improve CPU usage |
| Driver Support | FreeBSD, Linux, VMware ESXi, Windows 7, 8, 8.1, 10, Server 2008, 2012, 2016 |
| 1 x PCIe Network card |
| 1 x User&rsquos Manual |
| 1 x CD Driver |
| 1 x Low profile bracket |
| Accessories |
| Operating Support | FreeBSD, Linux, VMware ESXi, Windows 7, 8, 8.1, 10, Server 2008, 2012, 2016 |
| Hardware Requirement | Available PCI Express x1 slot |
| Adapter Type | Intel 1 Gigabit adapters |
| Cable Type | Category 5 or 5e twisted 4-pair copper for 1000BASE-T or 100BASE-TX |
| Standards Compliance | Compliant with TIA-568 wiring specification |
| Maximum Cable Length | 100 meters |
| Category 3 Support | Only supports 10Mbps |